Product Categories

IPS-RT11020 Factory Production High-quality RackMount 110vdc 20a rectifier battery charger
Model: IPS-RT11020 110VDC 20A Switching Power Supply/Rectifier Power Supply ① AC INPUT : Single phase 220VAC±20% 50/60HZ ② DC OUTPUT voltage: 110VDC ③ DC OUTPUT curren for load: 20A ④ Battery OUTPUT current for battery: 5A ⑤ Max power: 2200W ⑥ Communication: RS485*1 ⑦ Design: 19inch rack 2U ⑧ Machine size: 482L*240W*88H(MM) ⑨ Package size: 610L*360W*170H(MM) ⑩ Net weight/Gross weight: 9KG/11KG

I. INTRODUCTION

1. IPS-RT110 series of high-frequency switching power supply is IDEALPLUSING/ power off the company mainly for China's mobile communications, program-controlled switches, access network equipment, telecommunications equipment, servers, local area network, communications room base station and other communications research and development of independent research and production Of the main products.

2. The series of high-frequency switching power supply using advanced dual-tube forward switch technology, the isolation between the design of the module to prevent the interaction between the modules.

3. The series of high-frequency switching power supply with AC input over-voltage protection, DC output over-voltage protection, over-current protection, short circuit protection and other multiple protection.

4. The module uses a standard rack-like design with a width of 19 inches and a height of 1U. Ultra-low radiation, the use of advanced electromagnetic compatibility design, high-frequency switching power supply to meet the "communication power supply equipment electromagnetic compatibility limits and measurement methods" (People's Republic of communications industry standard YD / T983).

 

II: PRODUCT SPECIFICATIONS

Brand: IDEALPLUSING

Application environment: telecommunications equipment / switches / servers / Ethernet / LAN / MAN / communications room base station

Working mode: AC / DC

Nominal voltage: +110VDC, -110VDC

Rated current: 5A~20A

Module configuration: none (single type)

Power distribution: no (terminal block output, 1 load interface, 1 battery interface)

Outer structure: Rack type (2U)

 

III. FEATURES

1.   The use of advanced dual-tube forward switch technology, the isolation between the design of the module to prevent the interaction between the modules.

2.   With AC input over-voltage protection, DC output over-voltage protection, over-current protection, short circuit protection and other multiple protection.

3.  They can meet the 220V AC, 110V AC power supply system standard. Wide input voltage range, the basic applicable to a variety of power grid system power supply requirements, compatibility is better.

4.  The head module uses 3 and a half table display, display the output current and voltage, simple and practical.

5.  The module is designed with a standard rack-mounted design with a width of 19 inches and a height of 1U/2U.

6.  Wide operating temperature range. -25℃~+55℃ temperature range can be full output power.

7.  Small size, light weight, easy after-sales maintenance.

 

IV: SPECIFICATION

Brand

IDEALPLUSING OR OEM

Model

IPS-RT1105

IPS-RT11010

IPS-RT11020

Technical characteristics

Parameter

AC input

Input

Single-phase three-wire system(L/N/PE)

Input voltage(V)

220VAC±20% or customize 110VAC±20%

Input Frequency

Rated input frequency:50/60HZ,Fluctuation range:45Hz~66Hz

Inrush current

Under rated input conditions, the starting inrush current is not greater than the rated operating state of the input current peak value of 150% (from the current spikes caused by capacitance EMI does not consider)

Effectiveness

≥88%

Input power factor

≥0.9

DC output

Output Power(W)

550W

1100W

2200W

Output voltage(V)

110VDC

Rated output current(A)

5A

10A

20A

Regulators Accuracy

≤±2V

Broadband noise voltage

≤50mV (3.4KHZ~150KHz)   ≤20mV (0.15KHZ~30MHz)

Discrete frequency noise voltage

≤5mV (3.4KHZ~150KHz)   ≤3mV (150KHZ~200MHz)

≤2mV (200KHz~500KHz)   ≤1mV (0.5KHZ~30MHz)

Peak noise voltage

≤150mV (20MHzbandwidth)

Current capacity of the inter-module

(Parallel connection)

The maximum and the minimum of the following difference 2A (above 10% load)

Security

Insulation strength

Input to output: 1500VDC input on the chassis: 1500VDC output on the chassis: 500VDC

Leakage current

<1.5mA

Reliability

MTBF≥100000h

Battery Port (Optionl)

110VDC*5A

RS485 Communication Port(Optionl)

RS485*1

Cooling method

Forced air cooling (internal rectifier DC fans, wind flow 42CFM)

Working environment

Operating temperature

-10℃~﹢50℃

Storage temperature

-40℃~﹢85℃

Relative humidity

10%~90%(No condensation)

Mechanical

parameter

Machine Dimensions

L482*W240*H88(MM)

Package Dimensions

L610*W360*H170(MM)

Net Weight/Gross Weight

8.5KG/11KG


V: MODEL LIST

MODEL

SPECIFICATION

DIMENSION

48VDC SERIES

IPS-RT4810

48VDC 10A

19Inch 2U, L482*W240*H88(MM)

IPS-RT4820

48VDC 20A

19Inch 2U, L482*W240*H88(MM)

IPS-RT4830

48VDC 30A

19Inch 2U, L482*W240*H88(MM)

IPS-RT4840

48VDC 40A

19Inch 2U, L482*W240*H88(MM)

IPS-RT4850

48VDC 50A

19Inch 2U, L482*W240*H88(MM)

24VDC SERIES

IPS-RT2410

24VDC 10A

19Inch 2U, L482*W240*H88(MM)

IPS-RT2420

24VDC 20A

19Inch 2U, L482*W240*H88(MM)

IPS-RT2430

24VDC 30A

19Inch 2U, L482*W240*H88(MM)

IPS-RT2440

24VDC 40A

19Inch 2U, L482*W240*H88(MM)

IPS-RT2450

24VDC 50A

19Inch 2U, L482*W240*H88(MM)

220VDC SERIES

IPS-RT2205

220VDC 5A

19Inch 2U, L482*W240*H88(MM)

IPS-RT22010

220VDC 10A

19Inch 2U, L482*W240*H88(MM)

110VDC SERIES

IPS-RT1105

110VDC 5A

19Inch 2U, L482*W240*H88(MM)

IPS-RT11010

110VDC 10A

19Inch 2U, L482*W240*H88(MM)

IPS-RT11020

110VDC 20A

19Inch 2U, L482*W240*H88(MM)



WhatsApp
Wechat
Contact Us
Your Name:
Your Email:
Your Message:
This website uses cookies to enhance user experience and to analyze performance and traffic on our website.
We also share information about your use of our site with our social media, advertising and analytics partners.
Do Not Sell My Personal Information
Accept Cookies