Model

IPS-SPS -6000-24

IPS-SPS -6000-36

IPS-SPS -6000-48

IPS-SPS -6000-60

IPS-SPS -6000-110

IPS-SPS -6000-220

Output

DC Voltage

24VDC

36VDC

48VDC

60VDC

110VDC

220VDC

Rated Current

225A

150A

112A

90A

49A

24.5A

Current Range

0 - 225A

0 - 150A

0 - 112A

0 - 90A

0 - 49A

0 - 24.5A

Rated Power

5400W

Ripple

500 mV

500 mV

600 mV

600 mV

1000 mV

1500 mV

Constant Current Optimum Range

12 - 24V

18 - 36V

24 - 48V

30 - 60V

55 - 110V

110 - 220V

Rated Voltage Accuracy

±1.0%

Line Regulation

±1.0%

Load Regulation

±1.0%

Start Up& Rise Time

1500 mS , 700 mS /230 VAC (full load)

Input

Voltage Range

95-190 VAC (output current 50%), 195-265 VAC (output current 100%)

Frequency Range

45 Hz - 65 Hz

Power Factor

PF ≧0.99/230 VAC (at full load)

Efficiency ( Max )

90 %

91.5 %

92 %

92 %

92.5 %

93 %

AC Current

＜ 56A

Leakage Current

＜3.0 mA / 240 VAC

Protec Function

Short Circuit

Entering constant current and the voltage is lower than 10% of the rated voltage, Shut down and lock the output after 1 second, and recover after restart

Overcurrent

The user can set the over-current value to delay the output for 5 seconds and then shut down the output, and then resume after restarting.

Overpressure

Users can set the overvoltage value to shut down the output voltage, and restore after restart

Output Voltage Adjustment

0 - 26.4V

0 - 39.6V

0 - 52.8V

0 - 66V

0 - 121V

0 - 242V

Output Constant Current Adjustment

0 - 225A

0 - 150A

0 - 112A

0 - 90A

0 - 49A

0 - 24.5A

485 Communication

MODBUS Communication Protocol

Isolated Auxiliary Power Supply

12V 0.5A  (need to be customized)

Output Remote Switch

Default power on, high level power off (5V-12V) (need to be customized)

Alarm Signal Output

Power Good Signal (Dry contact ≦36V, 0.1A) (need to be customized)

Environment

Operating Temperature

-20 - +60℃

Operating Humidity

-20 - 90% RH No condensation

Storage Temperature And Humidity

-40 - +85℃, 10 - 95% RH No condensation

Safety

Vibration Resistance

10 - 500 Hz , 2G 10 Minutes/cycle, X, Y, Z Axis 60 minute

Insulation Resistance

Input to output: 100 Mhms /500 VDC /25℃/70% RH

Others

Size

432*179*242 mm (L*W*H)

Net Weight

9 KG

Remark

1. VAC unless otherwise specified. Values measured at voltage input, rated load and 25°C .

2. Ripple and noise voltages are measured with a 20 MHz bandwidth oscilloscope with 0.1μ and 47μ capacitors added to the ends of 12-inch twisted pair cables . Bandwidth Test.

3. Accuracy: includes setting error, line regulation and load regulation.

4. The output needs to be derated in case of low input voltage. Please refer to the static characteristic curve for details .

5. The startup time is measured when the machine is cold. Frequent power on and off may increase the startup time.