Specifications | 200V Output Series | ||||
Model | IPS-DH10-2004 | IPS-DH10-2005 | IPS-DH10-2008 | IPS-DH10-20010 | IPS-DH10-20015 |
AC input | Single-phase 220V±10% | ||||
Frequency 50Hz/60Hz | |||||
Output voltage | 0-200V | ||||
Output current | 0-4A | 0-5A | 0-8A | 0-10A | 0-15A |
Output power | 800W | 1000W | 1600W | 2000W | 3000W |
Power stability | ≦ 0.1%+10mV | ||||
Load stability | ≦ 0.1%+30mV | ||||
Voltage regulation accuracy | ≦ ±0.1%FS | ||||
Steady flow accuracy | ≦ ±0.1%FS | ||||
Ripple (rms) | ≤ 0.1%FS+10mV | ||||
Voltage setting accuracy | ±0.1%FS+10mV | ||||
Current setting accuracy | ±0.1%FS+10mA | ||||
Voltage readback accuracy resolution | 5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value). | ||||
10mV | |||||
Current readback accuracy resolution | 5-digit meter. Accuracy: ±0.1%FS + 3 digits (10%-100% of rated value). | ||||
1mA | 10mA | ||||
Display method | Broken code screen display | ||||
Output overvoltage protection | The menu settings include O.V.P. protection; the protection value can be set arbitrarily, and the output will be turned off after protection is applied. | ||||
Output overcurrent protection | The menu settings include O.I.P. protection; the protection value can be set arbitrarily, and output will be turned off after protection is enabled. | ||||
Over-temperature protection | Built-in OTP protection, with a protection value of 85℃ ±5% (radiator temperature). | ||||
Voltage setting | Menu settings, encoder knob input | ||||
Current setting | Menu settings, encoder knob input | ||||
Communication methods | RS-485/RS-232 (supports Modbus and SCPI protocols) | ||||
Function | Constant voltage/constant current, foldback current protection, memory mode, list sequence loop, configurable ON/OFF time, pulse width output, 9999 cycles, three preset voltage and current sets (full width model), and key lock. | ||||
Output polarity | The positive (+) and negative (-) outputs can be grounded arbitrarily. | ||||
Heat dissipation method | Forced air cooling | ||||
Operating environment | Designed for indoor use, with a temperature range of 0℃ to 40℃ and a humidity range of 10% to 85% RH. | ||||
Storage environment | Temperature: -20℃~ 70℃ ; Humidity: 10% ～ 90% RH | ||||
Size and weight | W215*H44*L450 (mm) Approximately 2.8 kg | W430*H44*L450 (mm) Approximately 3.5 kg | |||
Note: All values are typical and will be exceeded under different loads or other conditions. Accuracy is measured under load-sensing conditions; actual values may deviate from rated values due to temperature errors and component aging. | |||||
Note: FS represents full scale. The three digits indicate that the last digit of the display will jump three times. | |||||
