AC Input | Single-phase 220V ±10% or three-phase 380V ±10% |
Frequency: 50Hz/60Hz | |
Model | IPS-ATDP40001 |
Output Voltage | 0 - Rated voltage |
Output Current | 0 - Rated current |
Output Power | 0 - Rated power |
Power Supply Stability | ≦ 0.2%+10mV |
Load Stability | ≦ 0.2%+30mV |
Ripple | ≤ 0.5%+10mV（ rms） |
Voltage Value Display | 4-digit display meter Accuracy: ±0.3%FS + 3 digits (10%-100% of rated value) |
Display format: 0.000V-9.999V; 0.00V-99.99V; 0.0V-999.9V | |
Current Value Display | 4-digit display Accuracy: ±0.3% FS + 3 digits (10%-100% of rated value) |
Display format: 0.000A-9.999A; 0.00A-99.99A; 0.0A-999.9A | |
Menu Display | 64 x 128 dot matrix LCD display |
Output Overvoltage Protection | The menu allows you to set O.V.P. (Over-Voltage Protection) parameters; the protection value can be set arbitrarily, and the output will be shut off after protection is triggered. |
Output Overcurrent Protection | The menu allows you to set O.I.P. protection; the protection value can be set arbitrarily, and the output will be shut off after protection is triggered. |
Over-Temperature Protection | Built-in OTP (Over-Temperature Protection) with a protection value of 85℃ ± 5% (heatsink temperature); output is shut off after protection is triggered. |
Voltage Setting | Menu settings, input via keyboard or encoder knob. |
Current Setting | Menu settings, input via keyboard or encoder knob. |
Control Interface | Standard analog signal output, RS-485 control interface. |
Output Polarity | The positive (+) and negative (-) outputs can be grounded arbitrarily. |
Cooling Method | Forced air cooling |
Operating Environment | Designed for indoor use; temperature: 0℃ to 40℃ ; humidity: 10% to 85% RH |
Storage Environment | Temperature: -20℃ ~ 70℃ ; Humidity: 10% ~ 90% RH |
Note: All values are typical values; therefore, these values may be exceeded under different load conditions or other circumstances. Accuracy is measured with voltage sensing at the load terminal. Due to temperature variations and component aging, the actual values may deviate from the rated values. | |
Serial Number | Model | Input Voltage (V) | Output Voltage (V) | Output Current (A) | Power (W) | Dimensions/MM (H*W*L) | Net Weight (KG) | Gross Weight (KG) |
1 | IPS-ATDP8500 | 220VAC | 8VDC | 500A | 4000W | 190*430*455 | 20 | 28.0 |
2 | IPS-ATDP10400 | 220VAC | 10VDC | 400A | 4000W | 190*430*455 | 20 | 28.0 |
3 | IPS-ATDP13.3300 | 220VAC | 13.3VDC | 300A | 4000W | 190*430*455 | 19 | 27.0 |
4 | IPS-ATDP16250 | 220VAC | 16VDC | 250A | 4000W | 190*430*455 | 18 | 26.0 |
5 | IPS-ATDP20200 | 220VAC | 20VDC | 200A | 4000W | 145*320*450 | 12.0 | 13.5 |
6 | IPS-ATDP25160 | 220VAC | 25VDC | 160A | 4000W | 145*320*450 | 12.0 | 13.5 |
7 | IPS-ATDP32125 | 220VAC | 32VDC | 125A | 4000W | 145*320*450 | 12.0 | 13.5 |
8 | IPS-ATDP40100 | 220VAC | 40VDC | 100A | 4000W | 190*430*455 | 12.0 | 13.5 |
9 | IPS-ATDP5080 | 220VAC | 50VDC | 80A | 4000W | 145*320*450 | 11.0 | 12.5 |
10 | IPS-ATDP8050 | 220VAC | 80VDC | 50A | 4000W | 145*320*450 | 11.0 | 12.5 |
11 | IPS-ATDP10040 | 220VAC | 100VDC | 40A | 4000W | 145*320*450 | 12.0 | 13.5 |
12 | IPS-ATDP12532 | 220VAC | 125VDC | 32A | 4000W | 145*320*450 | 11.0 | 12.5 |
13 | IPS-ATDP16025 | 220VAC | 160VDC | 25A | 4000W | 145*320*450 | 11.0 | 12.5 |
14 | IPS-ATDP20020 | 220VAC | 200VDC | 20A | 4000W | 145*320*450 | 11.0 | 12.5 |
15 | IPS-ATDP25016 | 220VAC | 250VDC | 16A | 4000W | 145*320*450 | 11.0 | 12.5 |
16 | IPS-ATDP40010 | 220VAC | 400VDC | 10A | 4000W | 145*320*450 | 11.0 | 12.5 |
17 | IPS-ATDP5008 | 220VAC | 500VDC | 8A | 4000W | 145*320*450 | 12.0 | 13.5 |
18 | IPS-ATDP8005 | 220VAC | 800VDC | 5A | 4000W | 145*320*450 | 12.0 | 13.5 |
19 | IPS-ATDP10004 | 220VAC | 1000VDC | 4A | 4000W | 190*430*455 | 12.0 | 13.5 |
20 | IPS-ATDP15002.6 | 220VAC | 1500VDC | 2.6A | 4000W | 145*320*450 | 12.0 | 13.5 |
21 | IPS-ATDP16002.5 | 220VAC | 1600VDC | 2.5A | 4000W | 145*320*450 | 12.0 | 13.5 |
22 | IPS-ATDP20002 | 220VAC | 2000VDC | 2A | 4000W | 190*430*455 | 12.0 | 13.5 |
23 | IPS-ATDP40001 | 220VAC | 4000VDC | 1A | 4000W | 190*430*455 | 18 | 26.0 |
Functional Device Description-Front
Instructions
1. LCD display: Human-machine interaction interface, displaying Chinese menu;
2. Keyboard: Function keys and number keys;
3. Digital encoder: Can be used as an input substitute for the keyboard;
4. OUTPUT: This indicator light is on when there is output from the power supply;
5. "C.V" Status Indicator: Steady on indicates that the DC power supply is operating in constant voltage mode.
6. "C.C" Status Indicator: Steady on indicates that the DC power supply is operating in constant current (or current limiting) mode.
7. REMOTE Indicator: Remote control indicator, this light is on when remote control is active;
8. OV Indicator: Overvoltage protection indicator, this light is on during overvoltage conditions;
9. OI Indicator: Overcurrent protection indicator, this light is on during overcurrent conditions;
10. OT Indicator: Overtemperature protection indicator, this light is on during overtemperature conditions;
11. SHORT: Short circuit indicator, this light is on when the power supply is in a short circuit state;
12. Power Switch: Used to start and shut down
Functional Device Description-Back
