Rail-type switching power supply controls the time ratio of high-speed conduction and cutoff of the switch tube through pulse wave modulation IC electronic circuit, so that the secondary of the high-frequency transformer generates a required set of voltages. It is a DC power supply that can maintain stability.
Widely used in LED display screens, industrial control, switches, communications, electronic testing equipment power supplies, control equipment power supplies, radio and television, computer networks, medical equipment, intelligent monitoring, etc.
High cost performance, stable and reliable performance. The main components are of good quality and the brand uses 105°C long-life electrolytic capacitors with overload, overvoltage and short-circuit protection;
1. Fast dynamic response, output continuous short circuit, overvoltage, overcurrent and overheating protection;
2. Compact structure, small size and light weight, direct wiring, beautiful appearance, wall-mounted structure;
3. Output terminals can be connected in single or multiple channels in parallel
Electrical specifications
Module | DR- 15-5 | DR- 15- 12 | DR- 15- 15 | DR- 15-24 | |
Output characteristic | DC output | 5V | 12V | 15V | 24V |
Rated current | 2.4A | 1.25A | 1.0A | 0.63A | |
Current range | 0-2.4A | 0-1.25A | 0-1.0A | 0-0.63A | |
Rated power | 12W | 15W | 15W | 15.2W | |
Ripple&Noise (maximum) | 80mVp-p | 100mVp-p | 120mVp-p | 150mVp-p | |
Voltage adjustment range | 4.5-5.5V | 10.2-13.8V | 13.5-18V | 21.6-28.8V | |
Voltage accuracy | ± 2% | ±1% | ±1% | ±1% | |
Linear adjustment rate | ± 1% | ±1% | ±1% | ±1% | |
Load adjustment rate | ± 1% | ±1% | ±1% | ±1% | |
Load adjustment rate | 1000mS，30mS/230VAC；2000mS,30mS/ 1 15VAC (Full load) | ||||
Hold time | 30mS/230VAC；10mS/ 1 15VAC (Full load) | ||||
Input characteristics | Input voltage | 85-264VAC 120-375V DC | |||
Input frequency | 47-63HZ | ||||
Efficiency | 75% | 83% | 83% | 85% | |
Input current | 0.89A/ 1 15VAC 0.49A/230VAC | ||||
power factor | 0.65/ 1 15VAC 0.5/230VAC | ||||
Surge current | 55A/230VAC | ||||
Surge current | ＜1.0mA/240VAC | ||||
Protective characteristics | Over load protection | 110% -180% of rated power | |||
Protection mode: Hiccup protection, automatically restored after abnormal conditions are removed | |||||
Over current protection | 110% -180% of output current | ||||
Protection mode: Hiccup protection, automatically restored after abnormal conditions are removed | |||||
Short circuit protection | Short circuit between positive and negative poles at the output end | ||||
Protection mode: Hiccup protection, automatically restored after abnormal conditions are removed | |||||
Environmental | Working temperature | -30℃~70℃(Refer to the derating curve) | |||
Working humidity | 20~90%RH No condensation | ||||
Storage temperature/humidity | -40℃~85℃ 10~95%RH,No condensation | ||||
Anti vibration | 10~500HZ, 5G 10 minutes/cycle, X, Y, Z each 60 minutes | ||||
Safety and electromagnetic compatibility | Withstand voltage | Input to output: 1.5KVAC | |||
Insulation impedance | Input to output: 100Ohms/500V DC/25 ℃/70% RH | ||||
Electromagnetic compatibility emission | Compliant with EN55032 class A | ||||
Electromagnetic compatibility immunity | Compliant with EN61000-4-2 | ||||
Safety regulations | Complies with GB4943 | ||||
Others | Product size | 25*93*56（L*W*H） | |||
Package(KG) | 0. 1kg/pcs | ||||
Notes | 1. All parameters, unless otherwise specified, are measured at 230VAC voltage input, rated load, and 25 ℃ conditions. 2. Ripple and noise voltage are applied at the end of a 12 inch twisted pair oscilloscope with a bandwidth of 20MHz and an additional 0.1 μ And 47 μ The capacitance is measured at a bandwidth of 20MHZ. 3. Accuracy: including setting error, linear adjustment rate, and load adjustment rate. 4. In the case of low input voltage, it is necessary to derate the output. Please refer to the static characteristic curve for details. 5. The startup time is measured during cold start, and frequent switching on and off may increase the startup time. | ||||
All models
Model Specifications | (DC) Output Voltage Current | Input Voltage (AC) | Product Dimensions MM |
IPS-DR-15-5 | 5V/2.4A | 100-240V | 25*93*56 |
IPS-DR-15-12 | 12V /1.25A | 100-240V | 25*93*56 |
IPS-DR-15-24 | 24V/0.63A | 100-240V | 25*93*56 |
IPS-DR-30-12 | 12V/2A | 100-240V | 78*98*56 |
IPS-DR-30-24 | 24V/1.5A | 100-240V | 78*98*56 |
IPS-DR-45-12 | 12V/3.5A | 100-240V | 78*98*56 |
IPS-DR-45-24 | 24V/2A | 100-240V | 78*98*56 |
IPS-DR-60-12 | 12V/4.5A | 100-240V | 78*98*56 |
IPS-DR-60-24 | 24V/2.5A | 100-240V | 78*98*56 |
IPS-DR-75-12 | 12V/6.3A | 100-240V | 55.5*125*100 |
IPS-DR－75-24 | 24V/3.2A | 100-240V | 55.5*125*100 |
IPS-DR-120-12 | 12V/10A | 100-240V | 65.5*125*100 |
IPS-DR－120-24 | 24V/5A | 100-240V | 65.5*125*100 |
IPS-DR－240 | 24V/10A | 180-264V | 125.5*125*100 |
Model Specifications | (DC) Output Voltage Current | Input Voltage (AC) | Product Dimensions MM |
IPS-MDR-10-12 | 12V/0.84A | 100-240V | 22.5*90*100 |
IPS-MDR-10-24 | 24V/0.42A | 100-240V | 22.5*90*100 |
IPS-MDR-20-12 | 12V/1.67A | 100-240V | 22.5*90*100 |
IPS-MDR-20-24 | 24V/1A | 100-240V | 22.5*90*100 |
IPS-MDR-40-12 | 12V/3.33V | 100-240V | 40*90*100 |
IPS-MDR-40-24 | 24V/1.7A | 100-240V | 40*90*100 |
IPS-MDR-60-12 | 12V/5A | 100-240V | 40*90*100 |
IPS-MDR-60-24 | 24V/2.5A | 100-240V | 40*90*100 |
IPS-MDR-100-12 | 12V/7.5A | 100-240V | 55*90*100 |
IPS-MDR-100-24 | 24V/4A | 100-240V | 55*90*100 |
Model Specifications | (DC) Output Voltage Current | Input Voltage (AC) | Product Dimensions MM |
IPS-EDR-75-12 | 12V/6.3A | 100-240V | 32*125.2*102 |
IPS-EDR-75-24 | 24V3.2A | 100-240V | 32*125.2*102 |
IPS-EDR-120-12 | 12V/10A | 100-240V | 40*125.2*102 |
IPS-EDR-120-24 | 24V/5A | 100-240V | 40*125.2*102 |
IPS-EDR-150-12 | 12V/12.5A | 100-240V | 40*125.2*102 |
IPS-EDR-150-24 | 24V/6.25A | 100-240V | 40*125.2*102 |
Model Specifications | (DC) Output Voltage Current | Input Voltage (AC) | Product Dimensions MM |
IPS-NDR-75-12 | 12V/6.3A | 100-240V | 32*125.2*102 |
IPS-NDR-75-24 | 24V/3.2A | 100-240V | 32*125.2*102 |
IPS-NDR-75-48 | 48V/1.56A | 100-240V | 32*125.2*102 |
IPS-NDR-120-12 | 12V/10A | 100-240V | 40*125.2*102 |
IPS-NDR-120-24 | 24V/5A | 100-240V | 40*125.2*102 |
IPS-NDR-120-48 | 48V/2.5A | 100-240V | 40*125.2*102 |
IPS-NDR-150-12 | 12V/12.5A | 100-240V | 40*125.2*102 |
IPS-NDR-150-24 | 24V/6.25A | 100-240V | 40*125.2*102 |
IPS-NDR-150-48 | 48V/3.12A | 100-240V | 40*125.2*102 |
IPS-NDR-240-12 | 12V/17A | 100-240V | 63*125.2*113.5 |
IPS-NDR-240-24 | 24V/10A | 100-240V | 63*125.2*113.5 |
IPS-NDR-240-48 | 48V/5A | 100-240V | 63*125.2*113.5 |
IPS-NDR-480-12 | 12V/25A | 100-240V | |
IPS-NDR-480-24 | 24V/10A | 100-240V | |
IPS-NDR-480-48 | 48V/5A | 100-240V |
Model Specifications | (DC) Output Voltage Current | Input Voltage (AC) | Product Dimensions MM |
IPS-HDR-15-12 | 12V/1.25A | 100-240V | 17.5*90*54.5 |
IPS-HDR-15-24 | 24V/0.63A | 100-240V | 17.5*90*54.5 |
IPS-HDR-30-12 | 12V/2A | 100-240V | 35*90*54.5 |
IPS-HDR-30-24 | 24V/1.5A | 100-240V | 35*90*54.5 |
IPS-HDR-60-12 | 12V/4.5A | 100-240V | 52.5*90*54.5 |
IPS-HDR-60-24 | 24V/2.5A | 100-240V | 52.5*90*54.5 |
IPS-HDR-100-12 | 12V/7.1A | 100-240V | 52.5*90*54.5 |
IPS-HDR-100-24 | 24V/3.83A | 100-240V | 52.5*90*54.5 |
Model Specifications | (DC) Output Voltage Current | Input Voltage (AC) | Product Dimensions MM |
IPS-QYR-60-12 | 12V/4.5A | 100-240V | 52.5*90*54.5 |
IPS-QYR-60-24 | 24V/2.5A | 100-240V | 52.5*90*54.5 |
IPS-QYR-100-12 | 12V/7.5A | 100-240V | 70*90*54.5 |
IPS-QYR-100-24 | 24V/4.2A | 100-240V | 70*90*54.5 |
IPS-QYR-150-12 | 12V/12.3A | 100-240V | 105*90*54.5 |
How do we choose from so many models of switching power supplies?
Please pay attention to the next selection guide
Teach you how to choose products that meet your requirements
