2

It is a conversion device that converts electricity from the mains city ac voltage or batteries dc voltage to an continuous and purified AC power apply for computers and other electrical equipment

3

To prepare for the instability of the city electricity and power cuts. It also prevents various distortions of utility power, such as power supply voltage drop, surge voltage, spike voltage, and broadcast frequency interference.

4

This telecome inverter is a new generation of dual input inverter solution designed for the field of communication applications, which is suitable for the high reliability of the communication system.

5

The solution is equipped with a 110V/220V/230V AC power supply and a 220V DC power supply, which fills the gap between the traditional UPS power supply and common 5600W pure sine wave inverter solutions.

6

It uses a novel design structure that helps users to provide clean, stable, and durable AC power for critical loads, and has the same high reliability as the DC power supply system.

7

The design characteristics of the dedicated communication ensure the seamless conversion between the AC and DC power supply, almost no conversion delay, and no need to use the static switch.

2

Unattended operation: the system switches automatically to provide AC 220V to the load between the DC input and AC input;

3

Safety protection:  DC input polarity converse, over/low voltage, short-road, over-load, over temperature, and inverting malfunction;

4

Converse current control: not disturb another communication device in the same DC cabinet;

5

DC-dominated Mode:  the inverter is providing AC 220V to the load normally, and automatically switches to bypass AC 220V input if a DC input fault occurs.

6

AC-dominated Mode: the inverter is on standby, the bypass is providing AC 220V to the load normal, and the load will switch to the inverter automatically if the bypass AC 220V input fault occurs;

7

Maintenance bypass is available for battery replacement:

8

5 groups of passive dry contacts respectively for DC input fault, AC input fault, overload information, by-pass information, and output fault ;(Standard configuration)

9

Independent RS232 and RS485 communication interfaces to monitor and manage the device in real-time; (Standard configuration)

10

Support built-in TCP/IP interface to monitor and manage the device; (Optional)

11

Support built-in SNMP TCP/IP interface to monitor and manage the device (Optional).

l 19Inch 1U/2U/4U/8U Rack Mount

l With LCD Display + With RS485 Communication port

220VAC OUTPUT DESIGN

24VDC-220VAC

1-5KVA

48VDC -220VAC

1~10KVA

110VDC -220VAC

1~15KVA

220VDC-220VAC

1~15KVA

120VAC OUTPUT DESIGN

24VDC-120VAC

1-5KVA

48VDC -120VAC

1-6KVA

110VDC -120VAC

1-6KVA

Model

IPS-DTA1000-24

Rate Capacity(KVA)

1000VA

Rate power(W)

800W

DC Input

Rate input voltage

24VDC

Rate input Current

37A

Shut down voltage range

20~30.5VDC

Start-up voltage range

21.5~29.5VDC

Reflect noise current

≤10%

AC Input

Allow bypass voltage

220VAC

Bypass switch time (ms)

≤5ms

AC Output

Rated capacity (VA)

1KVA

Rated output power (W)

800W

output voltage

220VAC

Output voltage precision

220±10VAC

Output frequency precision

50±0.1%  Or  60±0.1% HZ

Waveform

Pure sine wave

Total harmonic distortion

≤3% (linear load) (THD)

Dynamic response time

5% (load 0←→100%)

Power factor (PF)

0.8

Overload capacity

100%-120%  60s121%-150%   10s

Inversion efficiency (80% resistive load)

≥85%

By-pass conversion time (ms)

≤5ms

Operating environment

Dielectric strength (input and output)

1500VAC, 1 minute

Noise (1m)

≤65dB

Operating environment temperature

-20℃~+50℃

Humidity

0~90%, no moisture condensation

Operating altitude (m)

≤2000

Indication

LCD display

Input and output voltage, frequency, output current, temperature, percentage, etc.

inverter status

Normal mains, normal inversion, battery under-voltage and output overload

Mechanical size

Standard rack

(Depth * Width * Height) (mm)

482*44*300(MM), 5KG

Protection function

Input under-voltage and over-voltage, output overload and short circuit protections, etc.

SALE CONTACT INFORMATION

Email

power@idealplusing.com

Office Tel

+86-20-89282095