1 | 19 inch 2U standard chassis, user can choose desktop or rack type |
2 | Constant voltage and constant current function |
3 | Low ripple and high stability |
4 | Continuous adjustable output voltage and current |
5 | Digital adjustment of encoder to make the adjustment more precise |
6 | Adopting PSFB-ZVS switching mode with high conversion efficiency |
7 | Over-voltage, Overheat and Over-voltage Protection of Electric Power Input |
8 | LAN and RS485/RS422 communication interface |
9 | MODBUS-RTU Standard Communication Protocol |
10 | Monitoring by computer software |
11 | Parameters can be calibrated by software |
12 | Local and Program Controlled Dual Operation Mode |
13 | Output rated power 600W or 1200W |
14 | Various models of rated voltage 1000V~12KV and rated current 0.1A-1.2A are available. |
Front Panel
|
|
① | Power Open Switch | |||
② | Key Function Analysis | FINE-Voltage and Current Rough and Fine Adjustment Selection Key; | ||
LIMI-Voltage and Current Preset Display Key; | ||||
OVP-SET-Over-voltage Setting Value Key; | ||||
LOCK-Power panel lock button; | ||||
REM-Programmable disconnection and long press address setting button; | ||||
OUT-power output control button; | ||||
③ | Analysis of State Indicator | FINE -Voltage and Current Fine Selection Indicator Light for Fine Adjustment; | ||
LIMIT -Voltage and Current Preset Display Indicator, turn on as preset value; | ||||
OVP-SET-Over-voltage setting indicator light to display the over-voltage setting value; | ||||
ACF-Input over-voltage indicator light, turn on input over-voltage; | ||||
OTP-Temperature Protection Indicator Light for Internal Temperature Protection of Power Supply; | ||||
OVP - Over-voltage Indicator, turn on the power output over-voltage; | ||||
LOCK - Power Lock Indicator light, power is locked; | ||||
REM - Programmable Indicator Light, which is programmed for power supply; | ||||
OUT - Output status indicator, turn on for power supply; | ||||
CV - constant voltage indicator lamp, power supply is in constant voltage state; | ||||
④ | Adjustment area | V-SET - Output Voltage Knob; | ||
I-SET - Output Constant Current Knob. | ||||
⑤ | Output voltage measurement terminal | Red - output positive; black - output negative. (The power supply in this series is not connected internally and can not be used.High voltage power supply no this interface) | ||
⑥ | Digital display | Including voltage display area and current display area. | ||
Back Panel |
| |||
① | RS-485/RS-422 Communication Interface | ② | LAN Communication Interface | |
③ | Output Terminal | ④ | Cooling window | |
⑤ | AC NPUT PORT | |||
TECHNICAL SPECIFICATIONS | ||||
Model | IPS-ATDP12000-0.1 | |||
Rated value
| Voltage（Empty Load） | 1000~12000VDC | ||
Current | 0~0.1A | |||
Over-voltage protection | 0~13200V | |||
Setting resolution
| Over-Voltage | 0.1V | ||
Voltage | 0.1V | |||
Current | 0.1mA | |||
Display resolution
| Voltage | 0.1V | ||
Current | 0.1mA | |||
Display Value Accuracy | Voltage | ≤0.1%+2LSB | ||
Current | ≤0.5%+2LSB | |||
Load regulation rate | Voltage | ≤0.5%+2LSB | ||
Current | ≤1%+2LSB | |||
Power regulation rate | Voltage | ≤0.5%+2LSB | ||
Current | ≤1%+2LSB | |||
Ripple (RMS) | Voltage | ≤1‰ | ||
Size(MM) | 520L*482W*88H | |||
ENVIRONMENTAL PARAMETERS | ||||
1 | AC INPUT | 220VAC (+10% 47Hz-63Hz) | ||
2 | Heat dissipation mode | forced heat dissipation by fan | ||
3 | Operating ambient temperature | 0-40 C | ||
4 | Storage ambient temperature | -20-70 C | ||
5 | Maximum ambient humidity for indoor use design | 95% | ||
SALE CONTACT INFORMATION | |
power@idealplusing.com | |
Office Tel | +86-20-89282095 |
