Product Name

Switching Power Supply

OUTPUT

Model

IPS-SP24-212

IPS-SP36-141

IPS-SP48-106

IPS-SP60-85

IPS-SP72-70

IPS-SP96-53

DC Voltage

24VDC

36VDC

48VDC

60VDC

72VDC

96VDC

Rated Current

250A

150A

112A

90A

83A

62.5A

Current Range

0 - 225A

0 - 150A

0 - 112A

0 - 90A

0 - 83A

0 - 62.5A

Ripple

500mV

500mV

600mV

600mV

1000mV

1500mV

Constant Current Optimum Range

12 - 24V

18 - 36V

24 - 48V

30 - 60V

36 - 72V

48 - 96V

Model

IPS-SP110-46

IPS-SP125-40

IPS-SP150-34

IPS-SP180-63

IPS-SP200-25

IPS-SP220-23

DC Voltage

110VDC

125VDC

150VDC

180VDC

200VDC

220VDC

Rated Current

54.5A

48A

40A

33A

30A

26A

Current Range

0-54.5A

0-48A

0-40A

0-33A

0-30A

0-26A

Constant Current Optimum Range

55-110V

62.5-125V

75-150V

90-180V

100-200V

110-220V

Rated Power

5400W

Rated Voltage Accuracy

±1.0%

Line Regulation Rate

±1.0%

Load Regulation Rate

±1.0%

Start-Up & Rise Time

1500mS,700mS/230VAC(Fully loaded)

INPUT

Voltage Range

95-190VAC(Output Current 50%),195-265VAC(Output Current 100%)

Frequency Range

45Hz - 65Hz

Power Factor

PF>=0.99/230VAC(Fully loaded)

Efficiency (Max)

90 %

91.5 %

92 %

92 %

92.5 %

93 %

AC Current

<56A

Leakage Current

<3.0mA / 240VAC

PROTECT

Short Circuit

When the constant current is entered and the voltage is lower than 10% of the rated voltage, the output is shut down and locked after 1 second, and recovers after restarting.

Over Current

The user can set the over-current value to delay the output for 5 seconds and then shut down the output, and then resume after restarting.

Over Voltage

Users can set the overvoltage value to shut down the output voltage, and restore after restart

Over Temperature

Shut down the output, automatically recover or restart after the temperature drops

485 Communication

MODBUS Communication Protocol

Isolated Auxiliary Power Supply

12V 0.5A  (Need customization)

Output Remote Control Switch

Default power on, high level power off (5V-12V) (need to be customized)

Alarm Signal Output

Power normal signal (dry contact <=36V, 0.1A) (need to be customized)

ENVIRONMENT

Working Temperature

-20 - +60ºC

Working Humidity

-20 - 90% RH No condensation

Storage Temperature And Humidity

-40 - +85ºC, 10 - 95% RH No condensation

Vibration Resistance

10 - 500Hz, 2G 10 minutes/cycle, 60 minutes each for X, Y, Z axis

SAFETY REGULATIONS

Insulation Resistance

Input to Output:100Mhms/500VDC/25ºC/70%RH

Withstand Voltage

I/P-O/P:2KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC

OTHERS

Dimensions

432*179*242mm(L*W*H)

Net Weight

9 KG

1. All parameters are measured at 230VAC input voltage, rated load and 25ºC unless otherwise specified.
2. Ripple and noise voltage are measured with a 20MHz bandwidth oscilloscope with 0.1μ and 47μ capacitors added to the end of a 12-inch twisted pair, and measured at 20MHZ bandwidth.
3. Accuracy: includes setting error, linear regulation rate and load regulation rate.
4. Output must be derated for low input voltage conditions, please refer to the static characteristic curve for details.
5. Startup time is measured under cold start, and frequent switching may increase the startup time.