INTRODUCE
A DC/DC high voltage input power supply is a device that converts a high voltage DC power supply into a DC power supply of a different voltage level. They are widely used in a variety of applications
FEATURES
lUltra-small size, save space
lInput and output isolation
lUniversal input voltage: 85-264VAC/100-370VDC
lOutput overcurrent protection, short circuit protection
lThis series of products are widely used in industry, power, instrumentation, communication, smart home and other fields
SPECIFICATIONS
Project | Condition | Minimum | Typical Value | Maximum |
Input voltage range | AC input | 85VAC | 230VAC | 264VAC |
DC input | 100VDC | 310VDC | 370VDC | |
Input Current | 230VAC | / | / | 30mA |
115VAC | / | / | 60mA | |
Output voltage accuracy
| 3.3V output | / | ±3% | / |
Other outputs | / | ±2% | / | |
Linear regulation rate | Full load | / | ±1% | / |
Load regulation rate | 10%-100% load | / | ±1% | / |
Output ripple and noise* | 20MHz bandwidth (peak-to-peak) | / | 240mV | / |
Short circuit protection | Can be short-circuited for a long time, self-recovery | |||
Output overcurrent protection | ≥110%Io, self-recovery | |||
Minimum load | 0 | / | / | |
Power-off hold time | / | 20ms | / | |
Operating temperature | -25℃ | - | +70℃ | |
Storage temperature | -40℃ | / | +105℃ | |
Storage humidity | / | / | 95%RH | |
Switching frequency | / | 65kHz | / | |
Insulation voltage | Input to output, test 60s, ≤5mA | 1500VAC | / | / |
MTBF | MIL-HDBK-217F@25℃ | 215000h | / | / |
Note: * Ripple and noise are tested using the parallel line test method (the oscilloscope probe is close to the test, and a 10μF high-frequency low-resistance electrolytic capacitor and a 0.1μF ceramic capacitor are connected in parallel at the test point). If the user needs to reduce the output ripple, an LC filter circuit can be added. For specific parameters, see the recommended circuit (L2 and C1), which can be reduced to 50mV (TYP). | ||||
MODEL LIST
Model | Input voltage range | Output Power | Rated output voltage( V ) | Rated output current( mA ) | size (Length * Width * Height) |
IPS02-T2S03 |
85-264VAC /100-370 VDC
| 1.6W | 3.3VDC | 500mA | 25.0*22.0* 17.5mm |
IPS02-T2S05 |
2W | 5VDC | 400mA | ||
IPS02-T2S09 | 9VDC | 222mA | |||
IPS02-T2S12 | 12VDC | 166mA | |||
IPS02-T2S15 | 15VDC | 133mA | |||
IPS02-T2S24 | 24VDC | 83mA | |||
IPS02-T2S09-S | 9VDC | 222mA | |||
IPS02-T2S12-S | 12VDC | 166mA | |||
IPS02-T2S15-S | 15VDC | 133mA | |||
IPS02-T2S24-S | 24VDC | 83mA | |||
Remark: The “ S ” suffix indicates a safety version . " suffix is the normal version. | |||||
