Model

IPS-SPS -3000-12

IPS-SPS -3000-24

IPS-SPS -3000-36

IPS-SPS -3000-48

IPS-SPS -3000-60

IPS-SPS -3000-220

Output

DC Voltage

12VDC

24VDC

36VDC

48VDC

60VDC

220VDC

Rated Current

180A

125A

83.3A

62.5A

50A

13.6A

Current Range

0 - 180A

0 - 125A

0 - 83.3A

0 - 62.5A

0 - 50A

0 - 13.6A

Rated Power

2700W

3000W

Ripple

200 mV

200 mV

260 mV

300 mV

500 mV

1000 mV

Constant Current Optimum Range

6 - 15V

12 - 24V

18 - 36V

twenty four - 48V

30 - 60V

110 - 220V

Rated Voltage Accuracy

± 1.0%

Line Regulation

± 1.0%

Load Regulation

± 1.0%

Start Up& Rise Time

1500 mS , 700 mS /230 VAC (full load)

Input

Voltage Range

95-190 VAC (output current 50%),195-265 VAC (output current 100%)

Frequency Range

45 Hz - 65 Hz

Power Factor

PF ≧0.99/230 VAC (at full load)

Efficiency ( Max )

87 %

90 %

91.5 %

92 %

92.5 %

93 %

AC Current

＜ 18A

Leakage Current

＜3.0 mA / 240 VAC

Protec Function

Short Circuit

Entering constant current and voltage lower than rated voltage 10%, 1 After seconds, the output is shut down and locked, and it will recover after restarting.

Overcurrent

User-settable over-current value delay 5 The output will be turned off after seconds and will be restored after restart.

Overpressure

Users can set the overvoltage value to shut down the output voltage, and restore after restart

Output Voltage Adjustment

0 - 15V

0 - 26.4V

0 - 39.6V

0 - 52.8V

0 - 66V

0 - 242V

Output Constant Current Adjustment

0 - 180A

0 - 125A

0 - 83.3A

0 - 62.5A

0 - 50A

0 - 13.6A

Current Sharing

Parallel current sharing

Isolated Auxiliary Power Supply

12V 0.5A

Output Remote Switch

Default power on, high level power off (5V-12V)

Alarm Signal Output

Power Good Signal (Dry contact ≦36V, 0.1A)

Environment

Operating Temperature

-20 - +60℃

Operating Humidity

-20 - 90% RH No condensation

Storage Temperature And Humidity

-40 - +85℃, 10 - 95% RH No condensation

Vibration Resistance

10 - 500 Hz , 2G 10 Minutes/cycle, X, Y, Z Axis 60 minute

Safety

Insulation Resistance

Input to output: 100 Mhms /500 VDC /25℃/70% RH

Pressure Resistance

I/PO/P:2 KVAC I /P- FG :2 KVAC O /P- FG :0.5 KVAC

Others

Size

289*174*69 mm (L*W*H)

Net Weight

3.3 KG

Remark

1. All parameters are in 230 VAC Voltage input, rated load and The values are measured at 25°C.

2. Ripple and noise voltage are 20 MHz Bandwidth Oscilloscope Band 12 Inch twisted pair ends 0.1 μ and 47 μ Capacitance is measured at 20 MHZ The measurement is performed at bandwidth .

3. Accuracy: includes setting error, line regulation and load regulation.

4. The output needs to be derated in case of low input voltage. Please refer to the static characteristic curve for details.

5. The startup time is measured when the machine is cold. Frequent power on and off may increase the startup time.